Build your own foosball table - List of materials

< Contents | List of materials | Foosball parts >

Back to table of contents

Material required for the body and legs:

Body

The body consists of plywood board. These boards have the advantage of being as good as warp-proof. The sides are made of 27mm board, the goalcasing of 18 mm board.
Required quantities :
1,3 m² 18 mm Plywood
0,85 m² 27 mm Plywood

Plywood Birch

Playfield

The playfield is made of one MDF board of 29 mm thickness, coated on both sides with a layer of HPL.
Required quantities :
0,84 m² 29 mm MDF
1,7 m² 0,8 mm HPL

MDF, Medium Density Fiberboard

HPL

HPL, High Pressure Laminate

Legs

The legs are made of steamed beech wood. Naturally any other type of hardwood can be used.
Required quantities :
0,03 m³ beech

Beech wood

All quantities have been calculated without cutting up!

On top of that you will need:

4 threaded rods M8, 76,5 cm long
4 sill plate links M6 x 70 mm
8 washers and castellated nuts M8, galvanized or made of stainless steel
2 piano hinges 32 mm, 28 cm long
130 woodscrews 3,5 x 16 mm
20 woodscrews 4,0 x 40 mm
12 lock screws M10 x 80 mm with washer and nut

< Contents | List of materials | Foosball parts >

Back to table of contents