Build your own Foosball Table - The Playfield

< Playfield II | Playfield III | Playfield IV >

Back to table of contents

When all lines have been cut out, we carefully remove the masking film.

Next all remaining surfaces are covered with paper. Make sure no holes or cracks are left open.

The white dye is applied with a sprayer. It is advisable to put on several thin layers, so that the paint does not run under the paper or turns itself into a thick goo.

The masking film is removed carefully right after the painting.

< Playfield II | Playfield III | Playfield IV >

Back to table of contents