Build your own Foosball Table - The Playfield

< Playfield III | Playfield IV | Playfield V >

Back to table of contents

We wait for the paint to dry. Next we use a circular saw to make an incision at an angle of 45° in the underside of the board near the corners. The depth of the incision will have to be adjusted so as to keep ca 3-4 mm.

For this groove we prepare 4 wedges. The narrow side of which has the thickness of the saw, the angle measures 5°.

With a little wood glue the wedges are inserted into the grooves and knocked in with a hammer.

Now at last the playfield can be cut to its final size of 119,5 cm x 69,0 cm.

< Playfield III | Playfield IV | Playfield V >

Back to table of contents